3-46 Machine Maintenance Procedures
Mainboard Installation 0
1. Connect DC-IN (C) cable to mainboard connector (D) (Figure 3-49).
2. Flip mainboard and align mainboard connectors to left side of lower cover (Figure 3-48).
3. Install mainboard at a slight angle into slots on left side (E) of lower cover (Figure 3-48).
Connectors on left side of mainboard (i.e. USB 3.0, HDMI, etc.) are set in lower cover
slots. Do not force mainboard when trying to install it.
4. Install and secure WLAN cables (B) to mainboard with adhesive tape (Figure 3-47).
5. Install and secure two (2) screws (A) to lower cover.
6. Install speaker modules.
7. Install WLAN module.
ID Size Quantity Screw Type
A M2.5x4.0 2
SG_JV51_HR.book Page 46 Friday, July 8, 2011 5:58 PM
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
To Next Page
Loading...
