3-36 Machine Maintenance Procedures
Bluetooth Module Removal 0
Prerequisite:
Palmrest Assembly Removal
1. Locate Bluetooth module (A) on upper cover (Figure 3-38).
Figure 3-38. Bluetooth Module on Lower Cover
2. Release module from adhesive strip (B) on upper cover (Figure 3-39).
Figure 3-39. Bluetooth Module
3. Disconnect module cable (C) from mainboard connector (D).
4. Remove module from lower cover.
SG_JV51_HR.book Page 36 Friday, July 8, 2011 5:58 PM
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru