Acer Aspire 5755G - Thermal Module Installation

3-48 Machine Maintenance Procedures
Thermal Module Installation 0
IMPORTANT:
+
Apply suitable thermal grease and make sure all heat pads are in place before
replacing module
.
CAUTION:
!
Thermal grease can damage mainboard. Use caution when applying.
The following thermal grease types are approved for use:
N302
1. Remove all traces of thermal grease from CPU using a lint-free cloth or cotton swab and
Isopropyl Alcohol, Acetone, or other approved cleaning agent.
2. Apply small amount of thermal grease to center of CPU (A) (Figure 3-51).
NOTE:
NOTE:
Force used during installation of thermal module is sufficient to spread grease over
CPU top.
Figure 3-51. Applying Grease to CPU
NOTE:
NOTE:
Keep module level to spread grease evenly.
A
SG_JV51_HR.book Page 48 Friday, July 8, 2011 5:58 PM
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru