Machine Maintenance Procedures 3-41
Keyboard Assembly Installation 0
1. Install keyboard (G) on upper cover. (Figure 3-43).
2. Install keyboard support plate (E) on keyboard. (Figure 3-42)
3. Slide keyboard support plate toward bottom edge (F) of upper cover.
Align support plate slots with upper cover guides (J) and guide pins (K) before securing
screws. Support plate must be secured under latch guide (H). (Figure 3-44)
Figure 3-44. Keyboard Support Plate Guides
4. Install and secure three (3) screws (A), two (2) screws (B), and five (5) screws (C) to
keyboard. (Figure 3-42)
5. Install upper cover.
ID Size Quantity Screw Type
A M2.0x2.5 3
B M1.6x2.0 Ni 2
C M1.6x3.0 5
SG_JV51_HR.book Page 41 Friday, July 8, 2011 5:58 PM
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
To Next Page
Loading...
