Machine Maintenance Procedures 3-49
3. Align module and heatsink to mainboard screw holes (Figure 3-52).
Figure 3-52. Thermal Module Installation
4. Install and secure four (4) screws (C/1 - C/4) and two (2) screws (D/5 - D/6), in numerical
order from one (1) to six (6), to mainboard (Figure 3-50).
5. Install module cable (B) to mainboard connector.
6. Install mainboard.
ID Size Quantity Screw Type
C M2.3x3.2 Ni 4
D M2.5x4.0 2
SG_JV51_HR.book Page 49 Friday, July 8, 2011 5:58 PM
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
To Next Page
Loading...
