Jumper and Connector Locations 5-9
6. Plug in AC adapter.
7. Press Power button until BIOS POST is finished
8. Remove conductivity tool from RCT_RST point.
9. Restart the system and press F2 to enter BIOS Utility Setup menu.
10. If no password prompt is shown, BIOS password is cleared.
11. If password prompt is shown, repeat steps 1 through 9.
SG_JV51_HR.book Page 9 Friday, July 8, 2011 5:58 PM
HTTP://MYCOMP.SU/ - Maintenance and Service Guide,Service Manual,Motherboard Schematics for Laptop/notebook
РЕМОНТ НОУТБУКОВ. Запчасти и комплектующие для ноутбука. Схемы, сервис мануалы, инструкции по разборке ноутбука.
ВОССТАНОВЛЕНИЕ ДАННЫХ. г. Санкт-Петербург, Тел.(812)951-37-99, Тел.8-921-951-37-99,ICQ:573812745, service@it-lux.ru
To Next Page
Loading...
