2-8 System Utilities
When prompted to enter the password, three attempts are allowed before
system halts. Resetting the BIOS password may require the user to return the
computer to its dealer.
Erase all Secure Boot
Setting
Option to clear all Secure Boot signature
databases (PK, KEK, db, dbx).
Note: An administrator password is required to
configure this parameter.
–
Select an UEFI file as
trusted for executing
Option to launch an UEFI application from the
FAT32 EFI partition on your hard drive or FAT32
formatted USB drive.
Note: An administrator password is required to
configure this parameter.
–
Restore Secure Boot to
Factory Default
Option to set the secure boot mode to standard
mode which restores the factory defaults.
Note: An administrator password is required to
configure this parameter.
–
Current TPM State Displays current TPM status. –
Change TPM State Option to set TPM status.
Note: An administrator password is required to
configure this parameter.
No Change
Enable &
Active
Deactivate &
Disable
Clear
Table 2-3. BIOS Security (Continued)
Parameter Description Option
To Next Page
Loading...
