3-8 Machine Maintenance
Removing the Battery Pack 0
1. Perform the “Removing the Lower Case” procedure described on page 3-7.
2. Remove the screw securing the battery pack to the upper case.
Figure 3-5. Battery Pack Screw
3. Lift the battery pack off its socket in the upper case assembly, then slide it a few
millimeters away from the mainboard.
Figure 3-6. Battery Cable
Table 3-5. Screw
Step Screw Quantity Screw Type
Battery Pack Disassembly M2 x L2 1
To Next Page
Loading...
