System Utilities 2-11
Boot 0
Use this tab to set the preferred drive sequence in which the Setup Utility attempts to boot the
operating system. By default, the computer searches for boot devices in the following order:
1. Windows Boot Manager
2. Primary Hard Disk Drive
3. Network boot -IPV4
4. External USB hard drive
5. External USB optical drive
6. Network boot -IPV6
Press to select a device and press F5 or F6 to move it up or down the list.
Figure 2-8. BIOS Boot
Table 2-8. BIOS Boot
Parameter Description Option
Boot Mode Option to specify the boot mode of the
computer.
UEFI or Legacy BIOS
Secure Boot Option to enable or disable secure boot check. Enabled or Disabled
EFI Device First Option to enable or disable using EFI Device
first when booting.
Enabled or Disabled
To Next Page
Loading...
