Machine Maintenance 3-37
Removing the Keyboard 0
The keyboard is easily warped or damaged during the removal process. Take care not
to use excessive force when removing.
1. Perform the “Removing the Upper Case Assembly” procedure described on page 3-35.
2. Release the keyboard from the adhesive tape securing it to the upper case assembly.
Figure 3-56. Keyboard Adhesive Tape
3. Remove the fifty three screws securing the keyboard to the upper case.
Figure 3-57. Keyboard Screws
Table 3-57. Screws
Step Screw Quantity Screw Type
Keyboard Disassembly M1.2 × L1 53
To Next Page
Loading...
