Acer Aspire S7-391 - Removing the Touchpad Module

3-22 Machine Maintenance
Removing the Touchpad Module 0
1. Perform the “Removing the Lower Case” procedure described on page 3-7.
2. Perform the “Removing the Battery Pack” procedure described on page 3-8.
3. Release the connector latch (1) from the mainboard, then disconnect the touchpad cable (2).
Figure 3-31. Touchpad Cable
4. Release the connector latch (1) from the touchpad board, then disconnect the touchpad
cable (2). Detach the cable from the upper case assembly (3).
Figure 3-32. Touchpad Cable Self Adhesive Tape