Acer Aspire S7-391 - Page 56

2-18 System Utilities
5. Set Boot Mode to Legacy.
Figure 2-15. BIOS Boot Mode
6. Connect the USB HDD and reboot the computer.
7. At the command prompt, navigate to the DMI folder.
8. Execute the < DMI.EXE> file.
NOTE:
NOTE:
Refer to Table 2-16 on page 18 below for a list of DMI tool command usage.
9. Reboot when the process has completed.
Table 2-16. DMI Tool Command Usage
Parameter Description Command
Manufacture Name Read Manufacture Name
Write Manufacture Name
DMI.EXE /Rm
DMI.EXE /Wm
Product Name Read Product Name
Write Product Name
DMI.EXE /Rp
DMI.EXE /Wp
F/G Serial Number Read F/G Serial Number
Write F/G Serial Number
DMI.EXE /Rfgsn
DMI.EXE /Wfgsn
M/B Serial Number
(Type 2)
Read M/B Serial Number (Type 2)
Write M/B Serial Number (Type 2)
DMI.EXE /Rmbsn
DMI.EXE /Wmbsn
UUID Read UUID
Generate UUID and Write
Write UUID
DMI.EXE /RUUID
DMI.EXE /GWUUID
DMI.EXE /WUUID
Asset tag Read Asset Tag
Write Asset Tag
DMI.EXE /Rasset
DMI.EXE /Wasset