Machine Maintenance 3-43
Removing the LCD Panel 0
1. Perform the “Removing the LCD Bezel” procedure described on page 3-41.
2. Remove the four screws securing the LCD panel to the LCD back cover.
Figure 3-55. LCD Panel Screws
3. Release the LCD cable from the latch located near the hinge (1), then gently lift the LCD
panel (2).
Figure 3-56. LCD Cable
Table 3-55. Screws
Step Screw Quantity Screw Type
LCD Panel Disassembly M2 x L3 4
To Next Page
Loading...
