Machine Maintenance 3-75
3. Secure the ODD module to the bracket using two screws.
Figure 3-111. ODD Bracket Screws
4. Gently push the ODD module into the ODD drive bay until the ODD connector latch into
place.
Figure 3-112. ODD Module
5. Turn the computer over and open the LCD panel.
6. Secure the ODD module to the upper case assembly using one screw.
Table 3-111. Screws
Step Screw Quantity Screw Type
ODD Bracket Reassembly M2 × L3 2
To Next Page
Loading...
