3-88
Replace the WLAN Card 0
1. Insert the WLAN card to motherboard socket at an approximate 30-degree angle.
Figure 3-131. WLAN Card
2. Press the card down and consolidate it with 2 screws.
Figure 3-132. WLAN Card
3. Connect the WLAN auxiliary antenna cable(white) to the upper RF connector, connect the
WLAM main antenna cable(black) to the lower RF connector.
Table 3-34. Screws
Step Screw Quantity Screw Type
WLAN Card Replacement M2*4 2
To Next Page
Loading...
