2-16 System Utilities
AMI UEFI BIOS Flash SOP for DOS 0
Flash Scenarios 0
- For end-user ONLY. Currently, ALL ODMs should NOT use it to flash SBIOS. It will cause
unexpected problem since some BIOS block data maybe different between old and new
BIOS.
- It will keep DMI and setup settings.
- QTC team can simulate user's behavior by using it.
- QTC team can simulate user's behavior by using it.
- For AMD platform, you need to flash BIOS with command (Afudos ..\ROM\XXX.ROM) from
win 7 upgrade to win8. Then, follow the below steps ([Flash 4M BIOS]) to flash BIOS again.
- For Intel platform, you need to follow other SOP(AMI UEFI BIOS Flash SOP for DOS with
ME) from win7 upgrade to win8.
Flash UEFI BIOS SOP for DOS 0
1. Press “Del” enter BIOS Setup Menu.
2. In “Authentication” page, Set “Secure Boot” function as “Disabled”.
To Next Page
Loading...
