System Utilities 2-13
Boot Options 0
Change User Password This item is available if supervisor
password is installed.
If clear supervisor password, user
password should also be cleared.
All setup items will be view-only except
user password item if login with user
password, the hot key F9 (load default
settings) is also not available to change
BIOS settings.
[Press Enter]
Boot Sector Virus Protection Enabled/Disabled Boot Sector Virus
Protection.
Display this item if onboard SATA mode
is IDE mode.
Hide this item if onboard SATA mode is
AHCI mode.
Disabled/Enabled
Table 2-8.
Parameter Description Options
To Next Page
Loading...
