Acer Aspire ZS600 - Ieee 1394

Hardware Specifications and Configurations 1-13
Connectors support:
Side 2 jacks follow HD audio definition.
Audio jacks’ color both are black.
Add HD de-pop CKT (the attachment is the reference, please propose your
solution)
S/N ratio: 90 dB at rear output jack
Follow Acer Audio Spec v5.2 and Audio C/R should support Acer Internal speaker
spec
Follow Realtek audio design: (for front DB jack detection issue)
Jack Detection Resistor are located near Codec IC
Noise will bypass by Jack Detection Resistor, Jack Detect function will be workable
Audio device should meet Microsoft Windows Professional and Windows 7 latest
logo requirement
LAN 0
Controller: Realtek RTL8111FA Gigabit Ethernet controller
Port: 1 x RJ45 rear port from Gigabit Ethernet
Design Criteria:
Should be worked under 10/100/1000Mbps environment
Reserved disable function on both hardware and BIOS side, Default is enabled
USB 0
Controller: Intel H61 (USB 2.0) & Etron EJ168A (USB 3.0)
Ports Quantity: 10
4 ports USB 2.0 for rear I/O panel
2 ports USB 3.0 for side I/O panel port (one USB 3.0 port with charger only near by
cardreader)
3 ports for Daughter board (BT/TP/CM)
1 port for mini-PCIE card (TV-Card)
Data transfer rate support:
USB 3.0 (side I/O only) / 2.0 / 1.1
IEEE 1394 0
None
Buzzer 0
1 on board buzzer
Front Panel I/O Header 0
None