3-90
Replace the VGA Card 0
1. Position the VGA lock on base pan and set 1 screw on it.
Figure 3-134. VGA Lock
2. Insert the VGA card to the PCI-Express slot of motherboard, rotate the VGA lock
anticlockwise and tighten up the screw.
Figure 3-135. VGA Card
Table 3-35. Screws
3. Rotate the VGA holder anticlockwise to fix the VGA card.
Step Screw Quantity Screw Type
VGA Lock Replacement M3*5 1
To Next Page
Loading...
