Acer Aspire ZS600 - Hardware Monitor; System Led Definition

1-14 Hardware Specifications and Configurations
TPM Module 0
None
Hardware Monitor 0
Controller: Super I/O ITE/IT8772E
Monitor Functions:
Temperature:
 CPU/System
 VRD
 Monitor System Ambient Temp
 Monitor CPU Temp
 H61 PCH bridge temperature
Fan Speed:
 Monitor CPU fan speed
Voltage
 Vcore /+12V / +5V / +3.3V / 5VSB
Design Criteria:
Designed in CPU Over temperature warning/shut down circuit
Linear mode control for CPU/System/North bridge FAN separately by individual
sensor
PWM function should cover ACPI mode and non-ACPI mode
Support thermal shutdown mechanism
FAN control by super I/O but reserve Intel Quiet System Technology (IQST) feature
System LED Definition 0
Power State LED
S0 Blue Steady
S3 Amber Steady
S4/S5 Off
Storage State LED
N/A
Current and Voltage on LED 0
The Blue/Amber LED (for Power switch LED) current and voltage bias must follow
“LED Definition v1.4 in Appendix”
Voltage bias: 5V
Current: 20mA
All On-board Connectors List 0
Rear I/O connectors
1 HDMI-in port
1 HDMI-out port