Acer Aspire ZS600 - Page 23

Hardware Specifications and Configurations 1-15
4 USB 2.0 ports
1 RJ45 LAN port
1 DC power jack
Side I/O connectors
1 MS/SD/MMC card reader connector
1 B-Cas card reader connector (BOM option; for Japan SKU only)
2 audio jacks (MIC/Headphone)
2 USB 2.0 or 3.0 connectors. (BOM option)
On-board connectors
1 ILM+SKT+BP for LGA 1155 CPU (assign by Acer)
1 9Pin LCD Panel Power Supply Connector
2 SO-DDR3 memory sockets
1 90 Degree PCI-E x16 2.0 Slot (Support low-profile Graphic Cards, single slot)
2 mini-PCI Express x1 2.0 slot
3 SATA connectors
1 4-pin CPU fan connector
1 5pin USB 2.0 header for Bluetooth module connection
1 4pin USB 2.0 header for touch function control board connection
1 8pin USB 2.0 header for webcam module connection
1 10Pin Front Panel (Power SW+LED)
1 Jumper for clear CMOS
1 20pin header for DVI signal-in form VGA card. (BOM option)
1 30Pin LVDS Out header
1 4Pin SATA Power Out (for HDD/ODD power)
1 4Pin Speaker Connector
1 3Pin CIR header (support RC6 / RCMM)
1 on board buzzer
Acer Hardware spec 0
Please follow:
Acer Desktop H/W Validation Request rev 2.7
Acer Motherboard EE Design Request v3.7