Acer Aspire ZS600 - Page 63

System Utilities 2-31
3) Power on and boot to DOS to execute “BIOS_ME.bat” file.
NOTE:
NOTE:
The FPT tool version is by case.
4) After finishing flashing BIOS, please don’t execute any programs and power off system.
5) Please replace “FLASH_OVERRIDE” jumper from Pin 2-3 to Pin 1-2.
6) Unplug AC power cord for 10 sec.
7) Reconnect the power cord.
8) Power on the system and please press “Del” to enter BIOS Setup.