Acer K130 - USB Driver Upgrade Procedure

K130
Condential 5-9
1
5-2-2 USB Driver Upgrade
Procedure
1. Set up
- Plug in the power cord, then all the LED
will ash once.
- At this moment, hold on "POWER"
button(6~7 second) until the power LED
light red and blue, other LEDs are off,
release the "POWER" button.
- Connect projector and PC by USB cable
2. Execute Program
1) Found new hardware wiszard will
appear on the screen.
- Select “Install from a list or specic
location (Advanced)”
- Then click “Next”.
2) Select “Include this location in the
search”
1)
2)
USB port
USB cable
DC IN port
AC Adapter