Acer K130 - Chapter 4 Function Test & Alignment Procedure; Test Equipment Needed; Service Mode; OSD Reset

K130
Condential
4-1
Chapter 4
Function Test & Alignment Procedure
4-1 Test Equipment Needed
- PC
- DVD player with Multi-system, equipped "Component", "S-Video","Composite"
and "HDMI".
- HDTV Source (480P, 720P, 1080i, 1080P)
- Quantum Data 802B or CHROMA2327 (Color Video Signal & Pattern Generator)
- SD card
- USB ash disc
4-2 Service Mode
1. Turn on the projector
2. Do the following actions sequentially to get into Service Mode
(1) Press "Power", "Left", "Left" and "Menu" buttons sequentially.
(2) Service Mode will be shown.
(3) Choose "Exit" to leave the Service Mode after conrming the conguration.
4-3 OSD Reset
1. After nal QC step, we have to erase all saved change again and restore the OSD
default setting. The following actions will allow you to erase all end-users' settings and
restore the default setting:
(1) Please get into OSD menu.
(2) To execute "Reset" function.