Acer K130 - Setup Procedure

Condential
6-3
K130
6-3 Setup Procedure
1. Setup
- Hold on "Power" key and plug in Power
Adapter to projector. When the power LED
ash blue, release the "Power" button.
- Then the Power LED should ash blue->blue->red
and the menu LED lights Blue.
2. Connect all ports
(1) Connect P1 of xture to COM Port of
PC/Laptop by RS232 Cable.
(2) Connect P2 of xture to VGA1 IN
Port of projector by 24P to VGA Cable.
(3) Connect P3 of xture to DVI
Port of projector by DVI Cable .
(4) Plug Power Adapter to P4 of xture.
(5) Plug Power Adapter to projector.
Note: - You must conrm that the JP3 is closed in
all procedure.
24P to VGA Cable
JP3
P2
RS232 Cable
Adapter
P4
P1
24P to VGA Cable
P3
DVI Cable
DVI-HDMI adapter
DC IN
Cable