How to correct slanted sides on Acer N368 Projector image?
If possible, reposition the projector so that it is centered on the screen. Alternatively, press the "Keystone / " button on the remote control until the sides are vertical.
How to fix a partial or scrolling image on Acer N368?
For an incorrectly displayed image: Open "My Computer", then the "Control Panel", and double-click the "Display" icon. Select the "Settings" tab. Verify that your display resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Advanced Properties" button. If the problem persists, change the monitor display you are using and follow these steps: Verify that the resolution setting is lower than or equal to WUXGA-RB (1920 x 1200). Click the "Change" button under the "Monitor" tab. Click "Show all devices". Next, select "Standard monitor types" under the SP box, and choose the resolution mode you need under the "Models" box. Verify that the resolution setting of the monitor display is lower than or equal to WUXGA-RB (1920 x 1200).
What to do if Acer N368 Projector image is incorrectly displayed from notebook?
If the image is incorrectly displayed, follow the steps for item 2 to adjust the resolution of your computer. Press the toggle output settings (e.g., [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]). If you have difficulty changing resolutions or your monitor freezes, restart all equipment including the projector.
How to fix out of focus image on Acer N368?
First, ensure that the lens cap is removed. Then, adjust the focus ring on the projector lens. Also, make sure the projection screen is within the required distance: 3.3 to 29.7 feet (1.0 to 9.1 meters) for XGA series, 3.3 to 25.2 feet (1.0 to 7.7 meters) for WXGA series, 3.3 to 24.6 feet (1.0 to 7.5 meters) for 1080p series, or 3.3 to 24.0 feet (1.0 to 7.3 meters) for WUXGA series. You can find more information in the "How to get a preferred image size by adjusting distance and zoom" section.
Why is my Acer N368 not displaying on my laptop?
If the screen of your notebook computer is not displaying your presentation through the Acer Projector: If you are using a Microsoft® Windows® based notebook, some PCs may deactivate their own screens when a second display device is in use. Refer to your computer's manual for detailed information on how to reactivate it. If you are using an Apple® Mac® OS based notebook, open Display in System Preferences and select Video Mirroring "On".
What to do if Acer N368 Projector stops responding to controls?
If your Acer Projector stops responding to all controls, turn off the projector, unplug the power cord, and wait at least 30 seconds before reconnecting the power.
What to do if Acer N368 Projector LAN/WiFi or USB Display shows no signal?
If the LAN/WiFi or USB Display source shows 'No Signal' on your Acer Projector, power off the projector and then power it on again.
What to do if notebook screen isn't displaying presentation on Acer N368?
If the screen of your notebook computer is not displaying your presentation when using an Acer Projector: * For Microsoft® Windows® based notebooks: Some notebook PCs may deactivate their own screens when a second display device is in use. Refer to your computer's manual for detailed information on how to reactivate it. * For Apple® Mac® OS based notebooks: In System Preferences, open Display and select Video Mirroring "On".
What to do if Acer N368 Projector stops responding?
If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.
Why is my Acer Projector not displaying from my notebook?
If you are using a Microsoft® Windows® based notebook, some notebook PCs may deactivate their own screens when a second display device is in use. Refer to your computer's manual for detailed information on how to reactivate it. If you are using an Apple® Mac® OS based notebook, open Display in System Preferences and select Video Mirroring "On".
To Next Page
General
