Acer P1166 - Rod Adjustment

Condential 2-19
P1166 / P1266 / P1266i / P1166P / P1266P
3. Press 2 tenons (as green square) to
disassemble Elevator Holder.
4. Unscrew 2 screws (as red circle), then
press 1 tenon (as blue square) to
disassemble Elevator Foot.
2-21 Rod Adjustment
1. Environment adjustment
- The distance between the engine and the
screen is 2.37M
- This process should be done at a dark
environment. (under 5 Lux)
2. Procedure adjustment
- Change the screen to “white screen.”
- Adjust the screws by using the rod on the
engine module to readjust the image.
2
1