Acer P1166 - Assemble Elevator Module

Condential 2-21
P1166 / P1266 / P1266i / P1166P / P1266P
2-23 Assemble Elevator
Module
1. Fasten 1 tenon (as blue square) to
assemble ElevatorRoot. Then screw 2
screws (as red circle).
2.Fasten 2 tenons (as green square) to
assemble Elevator Holder.
3. Assemble 1 Spring (as yellow square).
Test”.
4. Choose “Return to Service Menu”.
5. Choose “Exit”.
Note: left key = decrease lamp hour
right key =increase lamp hour