Acer P1166 - Rod Module

Condential 2-27
P1166 / P1266 / P1266i / P1166P / P1266P
2. Assemble DMD Board and DMD
Chip Module.
3. Screw 2 hex screws (as red circle).
2-30 AssembleEngine
Module, Color Wheel
Module and Rod Module
1. Assemble Focus Ring.
Note: - Pay attention to the three tenons
when disassembling focus ring.
2. Screw 3 screws (as red circle)to
assemble ROD x plate and ROD
Module.
3. Screw 1 screw (as green circle) toScrew 1 screw (as green circle) to
assemble Photo Sensor with Color
Wheel Module.