Acer P1166 - Assemble DMD Board and DMD Chip Module

Condential 2-26
P1166 / P1266 / P1266i / P1166P / P1266P
2-29 Assemble DMD Board
and DMD Chip Module
1. Rotate the switch (as blue square) to
assemble DMD Chip.
5. Plug 1 connector (as red square) to
assemble Lamp Driver Module.
6. Screw 1 screw (as red circle) to
assemble Lamp Driver Module.
Note: - Put lamp driver module below the
bottom support shielding.