To Next Page

To Previous Page

English

Ceiling Mount Installation

If you wish to install the projector using a ceiling mount, please refer to the

steps below:

1 Drill four holes into a solid, structurally sound part of the ceiling, and

secure the mount base.

Note: Screws are not included. Please obtain the appropriate

screws for your type of ceiling.

2 Secure the ceiling rod using the appropriate type of cylinder screws.

8.4

130 mm

49.9

Short Rod

Screw Type A

50 mm length / 8 mm diameter -

Ceiling Mount Base

- Attach to ceiling

Long Rod

Extension Rod

Allen Key

- For tighten/loosen

Tightening Screw

Medium Rod

Large Cylinder Cap

Acer S1213Hn User Manual

Questions and Answers: