2.6.4 Plug & Play OS
When this parameter is set to Yes, BIOS initializes only PnP boot
devices such as SCSI cards. When set to No, BIOS initializes all PnP
boot and non-boot devices such as sound cards.
Set this parameter to Yes only if your operating
system is Windows 95.
2.6.5 Reset Resources Assignment
Set this parameter to Yes to avoid IRQ conflict when installing non-
PnP or PnP ISA cards. This clears all resource assignments and
allows BIOS to reassign resources to all installed devices the next time
the system boots. After clearing the resource data, the parameter
resets to No.
Refer to section 1.9 for instructions on installing and configuring ISA
cards.
2-26 User’s Guide
To Next Page
