2.1 Entering Setup
To enter Setup, press the key combination + + .
You must press + +
while the
system is booting. This key combination
does not work during any other time.
The BIOS Utility main menu then appears:
BIOS Utility
Basic System Configuration
Advanced System Configuration
Power Saving Configuration
System Security
PnP/PCI System Configuration
Load Setup Default Settings
¯ = Move Highlight Bar, ¬ = Select, Esc = Exit and Reboot
The parameters on the screens show default
values. These values may not be the same
as those in your system.
The grayed items (denoted with asterisks) on
the screens have fixed settings and are not
user-configurable.
2-2 User’s Guide
To Next Page
Loading...
