99 Chapter 3
Removing the Modem Card
1. See “Removing the Housing” on page 98. (Remove the left panel only)
2. Remove the screw on the bracket of the modem card. Set the screw aside, you will need it when
reinserting the modem card
.
Removing the AGP VGA Card
1. See “Removing the Housing” on page 98. (Remove the left panel only)
2. Remove the screw on the bracket of the AGP card. Set the screw aside, you will need it when reinserting
the AGP card.
3. Gently pull out the AGP card to remove it from the AGP slot.
.
4. Gently pull out the modem card to remove it from the PCI slot.
NOTE: There is no AGP VGA slot for Veriton 7500.
NOTE: When you turn on the system, BIOS automatically detects and assigns resources to the PCI or AGP
devices.
To Next Page
Loading...
