Chapter 2 40
Advanced BIOS Features
The following screen shows the Advanced BIOS Features.
The following table describes each Advanced BIOS Features parameter. Settings in boldface are the default
and suggested settings.
Parameter Description Options
Virus Warning Allows you to choose the Virus warning feature for
the IDE hard disk boot sector protection. If this
function is enabled and someone attempts to write
data into this area, BIOS will show a warning
message on screen and alarm beep.
Disabled
Enabled
Quick Power On Self Test This parameter speeds up POST by skipping some
items that are normally checked.
Enabled
Disabled
Silent Boot This item is used to decide if the system logo
displays when the system boots up.
Enabled
Disabled
Configuration Table Displays preboot system configuration table when
enabled.
Disabled
Enabled
Hard Disk Boot Priority Select Hard Disk Boot Device Priority Press Enter
Show Hard Disk Name
1/2/3/4/5
First Boot Device This parameter allows you to specify the system
boot up search sequence.
CD-ROM, Floppy, LS120, Hard
Disk, ZIP100, LAN (on board
LAN-- Boot from LAN),
Disabled
Second Boot Device This parameter allows you to specify the system
boot up search sequence.
Floppy, LS120, Hard Disk,
CD-ROM, ZIP100, LAN (on
board LAN-- Boot from LAN),
Disabled
Third Boot Device This parameter allows you to specify the system
boot up search sequence.
Hard Disk, Floppy, LS120,
CD-ROM, ZIP100, LAN (on
board LAN-- Boot from LAN),
Disabled
To Next Page
Loading...
