39 Veriton 3600(D/G)/5600(D/G)/7600(D/G)
IDE Primary Master/Slave and IDE Secondary Master/Slave Setup
The following screen appears if you select any of the IDE drive parameters:
The following table describes the parameters found in this menu.
Parameter Description Options
IDE HDD Auto-
Detection
Auto-detects your hard disk drive. Press Enter
IDE Primary Master Displays the device type Auto
None
Manual
Access Mode Selects the HDD access mode Auto
Large
LBA
CHS
Capacity Shows the size of your hard disk in MB. xxxxx MB
Cylinder Shows your hard disk’s number of cylinders. 0 to 65535
Head Shows your hard disk’s number of heads 0 to 255
Precomp Selects the Precomp number for old HDD parking 0 to 65535
Landing Zone Selects the Landing Zone number for old HDD parking 0 to 65535
Sector Shows your hard disk’s number of sectors 0 to 255
To Next Page
Loading...
