37 Veriton 3600(D/G)/5600(D/G)/7600(D/G)
Standard CMOS Features
Select “Standard CMOS Features” from the main menu to configure the drives installed in your system.
The following screen shows the Disk Drives menu:
The following table describes the parameters found in this menu.
Parameter Description Options
Date Lets you set the date following the weekday-month-day-
year format
Weekday: Sun, Mon....Sat
Month: Jan, Feb...Dec
Day: 1 to 31
Year: 1980 to 2079
Time Lets you set the time following the hour-minute-second
format
Hour: 0 to 23
Minute: 0 to 59
Second: 0 to 59
IDE Primary Master Lets you configure the hard disk drive connected to the
master port of IDE channel 1.
To enter the IDE Primary Master setup, press
e.
The IDE CD-ROM is always automatically detected.
(Show the Status:)
None
HDD or CD-ROM Number
IDE Primary Slave Lets you configure the hard disk drive connected to the
slave port of IDE channel 1.
To enter the IDE Primary Slave setup, press
e.
The IDE CD-ROM is always automatically detected.
(Show the Status:)
None
HDD or CD-ROM Number
IDE Secondary Master Lets you configure the hard disk drive connected to the
master port of IDE channel 2.
To enter the IDE Secondary Master setup, press
e.
The IDE CD-ROM is always automatically detected.
(Show the Status:)
None
HDD or CD-ROM Number
IDE Secondary Slave Lets you configure the hard disk drive connected to the
slave port of IDE channel 2.
To enter the IDE Secondary Slave setup, press
e .
The IDE CD-ROM is always automatically detected.
(Show the Status:)
None
HDD or CD-ROM Number
To Next Page
Loading...
