Acer X1130P - Page 38

38
9
(1)Disassemble the
screw*2(M3*6L), and
take off the lamp door.
(2)Disassemble the
screw*1(M3*4L) and
lamp wire, and take off
the lamp module.
screw
driver
10
(1)Disassemble the
screw*3(M3*8L).
(2)Disassemble the
grounding
screw*1(M4*6L), and
take off the Power B/D
SHD.
screw
driver
11
Disassemble the
wire*2 and screw*1
(M3*7L), and take off
the power BD and
ballast Mylar.
screw
driver
12
(1)Disassemble the
screw*2(M3*7L), and
take off the lamp box.
(2)Disassembly the
screw*2(M3*8L), and
take off the blower fan
screw
driver
screw*1
grounding screw *1
ballast wire
screw*1
blower fan's
thermal wire
screw*1
screw*1
screw*1
screw*1
2
1
Ballast Mylar
Screw*3
Note: Circuit boards > 10cm
2
has been highlighted with the yellow
rectangle as above image shows. Please detach the Circuit boards and
follow local regulations for disposal.