Acer X1130P User Manual

77
RS232 Connection
1. Connection:
Below shows the illustration of connection between PC and Projector.
<CAUTION>
 Make sure that your computer and projector are turned off before connection.
 Power on the computer first, and then plug the power cord of the projector. (It may
cause Com port incorrect function, if you do not follow this instruction)
 Adapters may be necessary depending on the PC connected to this projector. Please
contact with your dealer for further details.
2. Hardware connection
<download cable 1>
<pin assignment for this two end>

Acer X1130P Specifications

General

Number of colors	1.073 billion colors
Projection distance	11.3 m
Vertical scan range	50 - 85 Hz
Horizontal scan range	30 - 100 kHz
Projection technology	DLP
Contrast ratio (typical)	3000:1
Screen size compatibility	0.73 - 7.62 \
Projector native resolution	SVGA (800x600)
Keystone correction, vertical	±40 °
Digital zoom	2 x
Aspect ratio	4:3, 16:9
RS-232 ports	1
Dimensions (WxDxH)	264 x 225 x 95 mm
Power requirements	100 - 240V
Lamp type	UHP
Lamp power	189 W
Light source type	Lamp
Service life of light source	3000 h
Service life of light source (economic mode)	4000 h
Serial interface type	RS-232
Noise level	31 dB
Power consumption (standby)	1 W
Power consumption (typical)	280 W

Weight and Dimensions

Weight	2300 g