Acer X1130P - Page 46

46
Fig. 3-7
4. AL, HSG ILL and HSG DMD Assembly:
4.1 Placed “AL” on the “HSG DMD”. The “raised surface” of “AL” shall toward “DMD
direction” (Fig. 4-1).
4.2 To assemble ”HSG ILL SUB Module” with “HSG DMD” and cover over on “AL” and the
then lock with screws (Fig. 4-2).
Fig. 4-1 Fig. 4-2
AL
DMD Direction
screw
Fixed shafts& holes
screw