9
(Front, Rear).
15.0 Audio X1130P: None
X1130PA / X1230PK/ X1230P/ X1237/ X1230PA: see below
SPEC
15.1 PC Audio Input X1130PA / X1230PK/ X1230P/ X1237/ X1230PA :
Φ3.5mm stereo mini jack
500mVrms 10 KΩ or more
15.2 Speaker
X1130PA /X1230PK / X1230P/ X1237/ X1230PA:
Speaker 8Ω 2W X 1, Amplifier 1W X1
16.0 Lamp hour
Lamp hour = [Hour used in Normal Mode] + 3/4 *[Hour used
in Eco. Mode]
17.0 Closed Caption (CC)
17.1 CC version CC1/CC2/CC3/CC4
18.0 Instant On
(Running change to phase-in X1130P/X1130PA /X1230PK /
X1230P/ X1237/ X1230PA MP stage)
After turn off projector, there is 120 seconds called “Instant
On stage”. At this stage, user can turn on the projector. Aftet
this stage, projector will cooling for 20 seconds, and all
keypads are not allowed to operate.
19.0 3D Projection
(Running change to phase-in X1130P/X1130PA /X1230PK /
X1230P/ X1237/ X1230PA MP stage)
See below detail description.
3D Projection :
This function is only for 3D contents and must wear 3D glasses.
TI DDP DDP2430 TI DDP DDP2431
• Does not support FRC (Frame Rate Conversion)
• Can not support HQFS 60Hz 3D source from
DVD which need to go thru FRC
• Can only support 120Hz 3D source from PC
(VGA/DVI/HDMI)
• Support FRC (Frame Rate Conversion)
• Can support HQFS 60Hz 3D source from
DVD which need to go thru FRC
• Can support 120Hz 3D source from PC
OSD :
− Add “3D”, “3D Sync Invert” in Image Page
− “3D Sync Invert” is adjustable when above "3D" is on. Otherwise 反白
− When 3D is enabled, Display Mode(in Color Page) is not adjustable (反白).
− For DDP2430 models : 3D / 3D Sync Invert , only appear for VGA/DVI/HDMI source.
Disappear if other sources.
− For DDP2230/2431 models : no this limitation.
To Next Page
Loading...
