@awsrijswijk
®
FlowFinder
MK
made in holland
Look at www.acin.nl for more information
tel: +31 70-3070703 I fax: +31 70-3070938 I email:www.acin.nl I web: www.acin.nl
MANUAL
The FlowFinder mk2® is the successor of the well known FlowFinder 153, which has
proven itself as the benchmark for air ow measurements to balance mechanical air
supply and exhaust systems. The new FlowFinder mk2® is fully zero pressure compensated
in the range 10 to 550 m m
3
/hr (6 to 323cfm) and has a calculated compensation for its
resistance up to 850 m
3
/hr (500cfm).
“VALIDATING AND ADJUSTING VENTILATION SYSTEMS”
● Large range (10 to 850 m
3
/hr or 6 to
500cfm, supply and exhaust)
● Light and easy to handle
● Short measuring cycle
● With full battery 8 hours of
measurement (at ows < 100m
3
/hr)
● High accuracy
● Ventilation systems, also with low terminal
resistance
● Small air volumes
● Heat exchange units
● Natural ventilation
● Line and large diusers (with optional hoods or
by adding measurements)
Standard equipment:
● Battery charger
● Transport case
● User manual
● Calibration certicate
(traceable to primary standards)
● MicroSD card with USB and
SD adapter.
Options:
● Foldable hood 600 x 600mm
● Non-foldable hood 400 x 400mm
● Extra battery pack
Characteristics Applications
The new standard for air-balancing
To Next Page
Need help?
General
