19-11-2013 manual 3
Despite the fact that this manual has been carefully put together by ACIN instrumenten bv, no responsibility is accepted for
any errors in the manual and possible consequences. We are obviously very interested in your comments and addions.
No part of this publicaon may be reproduced and / or published by print, photocopy, microlm or any other method
without prior wrien permission of ACIN instrumenten bv.
CONTENTS
1. PARTS OF THE FLOWFINDER MK2® 4
2. SPECIFICATIONS OF THE FLOWFINDER MK2® 4
3. REMOVING AND CHARGING OF THE BATTERY PACK 5
4. SWITCHING ON OF THE FLOWFINDER MK2® 5
5. THE DISPLAY IN MEASURING MODE 6
6. DEFAULT SETTINGS 6
7. USING THE HOODS 7
8. MEASURING WITH THE FLOWFINDER MK2® 8
9. ADDING OF MEASUREMENTS 9
10. STORING THE DATA 9
11. PROCESSING THE STORED DATA 10
12. PROCESSING THE DATA IN EXCEL 11
13. NAMING THE DATA STORAGE LABELS 12
14. EMERGENCY STOP 12
15. SWITCHING OFF OF THE FLOWFINDER MK2® 12
16. STORING THE FLOWFINDER MK2® 12
17. CALIBRATION 12
18. NOTES 13
To Next Page
Loading...