ACME DVS-5000 - Error Information; 7 Control by Universal DMX Controller; Connection

DVS-2500/5000/5000II
28B
6.5. Error Information
Lamp Startup Fail
It appears when there is no lamp or some wires are damaged.
Maintenance Fixture
It appears when the maintenance remaining time becomes 0S, please maintain the unit
after enter menu mode and reset the time.
Lamp On Over 1000 Hour
It appears when the lamp has been on over 1000 hours, please turn off the fixture and
change the lamp.
CPU-B Error, CPU-C Error, CPU-D Error
They appear when P.C.B board or some wires are damaged.
Pan Reset Error, Pan Encode Error, Tilt Reset Error, Tilt Encode Error, Shutter Reset
Fail, Focus Reset Fail
They may appear when turning on or resetting the unit, for some parts such as P.C.B board
are damaged. Please contact the qualified maintenance.
7. Control By Universal DMX Controller
7.1 Connection
DMX -
COMMON
DMX +
DMX INPUT DMX OUTPUT
3
1
2
3
1
2
2
3
1