Acomdata External HARD DRIVE USB 2.0 - System Requirements for Mac

14
What you need for the Drive itself:
• Mac with a G3 (or later) or Intel processor
• Mac OS 10.2 or later
• Available USB 2.0 or USB 1.1* port
* iF using A usb 1.1 connection, DAtA trAnsFers will be At usb 1.1 sPeeDs (uP to 12 mbPs).
Password Security requires 5 MB of free computer hard disk
space for the SecureHD Login software.
PushButton™ Backup and Sync use the supplied
Redemption backup software, which requires:
• Mac OS 10.3 or later
• 20 MB of free computer hard disk space
Attention Mac OS 10.2 users:
Your AcomData Drive was formatted at the factory with the
FAT32 file system. However, Mac OS 10.2 does not recognize
FAT32/MS-DOS formatted volumes larger than 128 GB.
If these conditions pertain to your situation, there are several
ways to deal with this issue:
System Requirements for Mac