42
This chapter will help you set up your HybridDrive with the
custom features you want. Please follow the instructions
carefully.
Step 1: Confirm the Drive
has been recognized by your PC
After you connect the Drive, the following should occur:
1. You will see a series of 'Found New Hardware' pop-up
alerts on the Taskbar. The final alert will say 'Your new
hardware is installed and ready to use'.
2. The Drive's CD partition will mount.
The CD partition will always mount automatically
whether Password Security is enabled or not. The
CD partition is read-only. It cannot be changed or
deleted. (See 'HybridDrive In-Depth' for information on the
VirtualCD+SecureHD partition scheme.)
To confirm the CD partition has mounted, go to My
Computer; you'll see an icon labeled 'CD PART' listed
under Devices with Removable Storage.
3. The HybridDrive Welcome Screen will appear.
Setting Up the Drive
To Next Page
Loading...
