55
4. In the New Password field, enter your new password.
5. In the Confirm New Password field, re-enter the new pass-
word.
6. In the Hint field, type in a word or short phrase that will help
you remember your password in case you forget it. Click OK.
7. You will see a message telling you to unplug and plug in the
device. Click OK, then unplug and plug in the USB cable con-
nected to the Drive.
8. After you re-connect the Drive, either the Welcome Screen
or the SecureHD Login window will appear. If the Welcome
Screen appears, click on 'Login' to access the SecureHD Login
window. Enter your password and then click OK.
You will see an alert message which says, 'Login successful.
The HD partition is now mounted and ready to use.' Click OK or
just wait for the message to time out.
To Next Page
Loading...
