58
3. In the New Password field, enter a password.
4. In the Confirm New Password field, re-enter the password.
5. In the Hint field, type in a word or short phrase that will help
you remember your password in case you forget it. Click OK.
6. You will see a message telling you to unplug and plug in the
device. Click OK, then unplug and plug in the USB cable con-
nected to the Drive.
7. After you re-connect the Drive, either the Welcome Screen
or the SecureHD Login window will appear. If the Welcome
Screen appears, click on 'Login' to access the SecureHD Login
window.
Enter your password and then click OK.
From now on, before the HD partition will mount, you will
need to input your password in the SecureHD Login win-
dow.
To Next Page
Loading...
