93
the device. Unplug and plug in the USB cable connected
to the Drive. The Drive should now mount properly and
Nomad should launch.
When I leave my computer idle for a while and come
back, the Drive won’t work properly.
A: The most likely cause is that your computer is going
into Sleep mode. The immediate solution is to restart your
computer. To prevent this problem from re-occurring, go
into your Power Settings/Energy Saver and set it to where it
never goes into Sleep mode.
The Drive feels quite warm when powered on.
Is this dangerous?
A: When in operation, the Drive may feel quire warm to the
touch. This is normal.
The Drive gives me a “Device cannot start. Code (10).”
A: This is a power issue. Make sure your connections are
secure. The other possibility is that the Drive has malfunc-
tioned and requires service.
To Next Page
Loading...
