36
Set 2nd Character Code
1. The "Character Position" changes from the 1st character to the 2nd character.
2. Press SET.
3. The "Character Position" changes to the "Character Code".
4. In this example, the 2nd character is "B". Press CHANGE until the Character Code is
"03" (B). Refer to “Character Code for Alphanumeric” on pages 64-68.
5. Press SET.
Set 3rd Character Code
1. The "Character Position" changes from the 2nd character to the 3rd character.
2. Press SET.
3. The "Character Position" changes to the "Character Code".
4. In this example, the 3rd character is "C". Press CHANGE until the Character Code is
"04" (C). Refer to “Character Code for Alphanumeric” on pages 64-68.
To Next Page
Loading...
